ACT ACTENTRY A10 Instrukcja Użytkownika Pobierz pdf (Strona 6)

ACTentry A10 Operating and Installation Instructions

0 Toggled

1 Timed

2 Timed

3 Timed Timed

4 Timed

5 Timed Timed

6 Timed Timed

7 Timed Timed Timed

ACTentry A10 Programming

Press the button followed by the programming code (initially 9999). The yellow LED will ash while

in programming mode. To exit the programming mode press button

. Exit from programming mode

occurs automatically if no key is activated for 30 seconds.

Changing Codes:

(From programming mode)

Enter 0 (Change codes)

0-9,

(user number 0-9, = programming code)

000000-999999 (4 or6digit code – 000000 deletes user)

Default user codes: Programming = 9999(99), User1=1234(56), All others inactive.

Setting switched output combinations:

(From programming mode)

Enter 1 (Set Outputs)

0-9 (User number 0-9)

0-7 (Output function code)

Output Function Code Door Output Door 2/Output 2 Output 3

Default function code is1(Relay Timed) for all users. When the door is toggled open, this will be

For example, to set user 1 to toggle the door open/locked:

Enter 1(set outputs), followed by 1(user1), followed by 0(Toggled). (e.g -9999-1-1-0- )

To set user 2 to open Door 2:

Enter 1(set outputs), followed by 2(user2), followed by 2 (Door 2 timed) (e.g. -9999-1-2-2- )

Setting timers:

(From programming mode)

Enter 2 (Set Timers

0-4 (Timer number) {Buzzer sounds indicating timing… wait required period}

(Stop timing) {Buzzer stops – timer set}

1 2 3 4 5 6 7 8 9 10 11 12

Brak uwag

ACT ACTENTRY A10 Instrukcja Użytkownika Strona 6